Lab 2: System Calls, Branches, and Comparisons
Submission timestamps will be checked and enforced strictly by the CourseWeb; late submissions will not be accepted. Check the due date of this lab on the CourseWeb. Remember that, per the course syllabus, if you are not marked by your recitation instructor as having attended a recitation, your score will be cut in half.
In this lab, you are going to learn how to use various system calls (syscalls), how to compare numbers, and how to jump and branch.
Useful System Calls
There are a number of system calls integrated into MARS. For this lab, you are going to use system calls to print integers, print strings, read integer input from the keyboard, generate random numbers, and exit the program. To use a system call, you need to indicate which system call is to be executed by setting the register $v0 to the number associated with the desired operation. Then, if needed, set arguments in the expected places (typically in the $a registers) and execute the syscall instruction. See ¡°Help¡± ¡ú ¡°Syscalls¡± for system call numbers, their associated arguments, and the registers in which those arguments should be placed.
Print Integer
To print an integer on the console screen, you need to set $v0 to 1, set $a0 to the value that you want to print, and then execute the syscall instruction. For example, to print the integer value stored in the register $s0, use the following code:
addi $v0, $zero, 1
addi $a0, $zero, $s0
Print String
# Syscall 1: Print Integer
# Set the value to print
# Print the integer
To print a string, you need to set $v0 to 4, set $a0 to the address of the first character of the null-terminated string to be printed, and then execute the syscall instruction. For example, the code below prints the string ¡°Hello, world!¡± on the console screen:
helloMsg: .asciiz
addi $v0, $zero, 4
la $a0, helloMsg
“Hello, World!”
# Syscall 4: Print String
# $a0 = address of the first character of helloMsg
# Print the string helloMsg
For a string to be printed to the console, the string must be null-terminated and it must be stored in the main memory. Note that the .asciiz directive in the .data segment above reserves a chunk of memory to store the null-terminated string ¡°Hello, World!¡± and allows the memory address of its first character to be referred to by the label helloMsg. The instruction la $a0, helloMsg then puts the memory address referred by helloMsg into $a0.
CS/COE 0447 ¡ª Computer Organization and Assembly Language Page 1
程序代写 CS代考 加QQ: 749389476
Lab 2: System Calls, Branches, and Comparisons Read Integer from Input
To read an integer from user input, you need to set $v0 to 5 and execute the syscall instruction. When the syscall is executed, the program will wait for user to enter an integer on the console screen. Once user enters an integer and press Enter, the value entered by the user will be stored in the register $v0 and control will return to the program. For example, the code fragment below sets register $s2 to an integer provided by user input:
addi $v0, $zero, 5
add $s0, $zero, $v0
System Time
The current system time in MARS is a count of the number of milliseconds since 00:00 UTC on January 1, 1970. This is a huge number which cannot be represented in a 32-bit quantity, so MARS uses two registers to store the current time as a 64-bit quantity.
To obtain the system time, set $v0 to 30 and execute the syscall instruction. Once control is returned to the program, register $a0 will contain the 32 least significant bits (or the ¡°low-order bits¡±) of the system time and $a1 will contain the 32 most significant bits (or ¡°higher-order¡± bits). For this lab, we will only use the low-order bits of the system time as a seed for our random number generator (RNG).
Set RNG Seed
As you may know, before generating random numbers, we need to set a seed for the random number generator (RNG). If we fail to do this, the RNG will generate the same set of random numbers every time the program is executed, which is usually not what we want. In MARS, you are allowed to have more than one random number generator but we will use only one for this lab.
To set the seed for an RNG, you need to set $v0 to 40, set $a0 to an ID number identifying the RNG (this can be any number or simply 0), set $a1 to a seed value (typically the low-order bits of the current time), and then execute the syscall instruction. Note that you need to set seed only once for each RNG.
Random Integer
After an RNG seed is set, we can generate a random number between 0 (inclusive) and an arbitrary upper bound (exclusive) using the random integer range system call.
To generate a random integer between 0 (inclusive) and n (exclusive), set $v0 to 42, set $a0 to the RNG ID you used when setting the RNG seed, set $a1 to the desired value of n, and execute the syscall instruction. When control is returned to the program, the randomly generated number will be stored in register $a0. The code below shows how to generate a random number between 0 (inclusive) and 5 (exclusive) and store the result in register $s1, assuming that the RNG ID is 0:
addi $v0, $zero, 42 # Syscall 42: Random int range
add $a0, $zero, $zero # Set RNG ID to 0
CS/COE 0447 ¡ª Computer Organization and Assembly Language Page 2
Lab 2: System Calls, Branches, and Comparisons
addi $a1, $zero, 5
add $s1, $zero, $a0
Terminate Program
# Set upper bound to 5 (exclusive)
# Generate a random number and put it in $a0
# Copy the random number to $s1
It is always a good idea to explicitly terminate your program, rather than letting the executing ¡°fall off¡± the end of the list of instructions. To terminate a program, simply set $v0 to 10 and execute the syscall instruction.
Branches and Comparison
In MIPS assembly language, you are allowed to move to an arbitrary point in a program, either when a condition is satisfied (a ¡°branch¡±) or without any condition at all (a ¡°jump¡±). A label is used to indicate such a point in a program, and it can be located anywhere in your program, whether before or after the branch/jump instruction.
There are two main branch instructions in MIPS, beq (branch if equal) and bne (branch if not equal). Both of these instructions take two registers and one label as their operands. For example, when the instruction beq $s0, $t5, foo is executed, it will make the program jumps to the location indicated by the label named foo if the values stored in register $s0 and $t5 are equal. Otherwise, the program will continue to the next instruction immediately following the beq instruction.
Likewise, when the instruction bne $s3, $zero, bar is executed, it will make the program jump to the location indicated by the label named bar if the value stored in the register $s3 is not equal to 0. Otherwise, it will continue to the next instruction.
Hopefully, you can begin to see how we might be able to accomplish some interesting control flow patterns with these instructions, similar to what if, else, and else-if blocks might allow us to do in a higher-level programming language.
For an unconditional jump, use the instruction j. Since there is no condition to be met, j only needs a label as its only operand. Combined with branches, this is a useful way to implement looping constructs like while, do-while, and for would offer in higher-level languages. For exam- ple, j loop will make the program jumps to the location indicated by the label named loop.
The code below shows how to use these instruction to ¡°countdown¡± from 5 to 1, while skipping 3:
addi $s0, $zero, 3 # Set $s0 to 3 (do not want to print 3)
addi $s1, $zero, 5 # Counter (start at 5)
# If integer to be printed is 0, we are done (so go to done)
beq $s1, $zero, done
# If integer to be printed is not equal to $s0 (3), go to printInteger
bne $s1, $s0, printInteger
addi $s1, $s1, -1 # Decrease the counter by 1
CS/COE 0447 ¡ª Computer Organization and Assembly Language
程序代写 CS代考 加微信: cstutorcs
Lab 2: System Calls, Branches, and Comparisons
printInteger:
addi $v0, $zero, 1
add $a0, $zero, $s1
addi $s1, $s1, -1
addi $v0, $zero, 10
# Go back to loop
# Syscall 1: print integer
# Integer to be printer (from $s1)
# Print integer
# Decrease the counter by 1
# Go back to loop
# Syscall 10: terminate program
To bring this all together, we need a good way to compare the values stored in two registers. The most commonly used instruction for this purpose is slt (set if less than). For example, slt $t0, $s1, $s3 will set the value of the register $t0 to 1 if the value stored in register $s1 is less than the value stored in the register $s3. Otherwise, the register $t0 will be set to 0. We generally use slt together with branch instructions (beq and bne) and jump (j to achieve behavior similar to what if, else, and else-if blocks would provide in higher-level languages.
Higher/Lower Game
Your task is to write a program that generates a random number between 0 and 9 (inclusive), then ask user to guess it. If the user gets it right, congratulate them. They have won and the game ends. Otherwise, you should tell them whether their number is too high or too low and let them guess again.
The user is allowed to guess at most three times. If the user cannot get it right after the third time, they have lost and they game ends. Make sure to prompt the user with a message and explain whether their guess is correct, too low, too high, etc. The examples below show a couple of game plays:
Enter a number between 0 and 9: 4
Your guess is too low.
Enter a number between 0 and 9: 7
your guess is too low.
Enter a number between 0 and 9: 8
your guess is too low.
You lose. The number was 9.
— program is finished running —
Enter a number between 0 and 9: 3
Your guess is too low.
Enter a number between 0 and 9: 7
your guess is too high.
Enter a number between 0 and 9: 4
Congratulation! You win!
— program is finished running —
CS/COE 0447 ¡ª Computer Organization and Assembly Language
浙大学霸代写 加微信 cstutorcs
Lab 2: System Calls, Branches, and Comparisons
Create a ¡°higher/lower¡± game program as described above. Please exactly match the format of the messages provided. Save your program as lab02.asm.
Submission
Submit your lab02.asm file via CourseWeb before the due date stated on the CourseWeb.
CS/COE 0447 ¡ª Computer Organization and Assembly Language Page 5