CSC3150 Assignment 1
Homework Requirements
Environment
WARNING!!! Before starting on this assignment, make sure you have set up your VM following the instructions in tutorial 1 or meet the following conditions. We would test all students’ homework using the following environment. For the programs unable to run on TA’s environment, an offline meeting is a must.
Linux Distribution
Ubuntu 16.04-22.04
Linux Kernel Version
Target version: 5.10.x
In the tutorials, we will cover installing a new version of the kernel, which follows the steps of downloading and compiling the source code and then loading the kernel modules into the system.
GCC Version
4.9 above (use gcc -v to get it) Makefile
Please write makefile to compile and install your program in this course. So please learn how to write makefile. We only use makefile to test your program when we grade (If not used, this program will have a score of 0, and it is not acceptable to use your own computer to run).
Submission
Due on: 23:59, 9 Oct 2023
Please note that, teaching assistants may ask you to explain the meaning of your program, to ensure that the codes are indeed written by yourself. Please also note that we would
check whether your program is too similar to your fellow students’ code using plagiarism detectors.
Late submission: A late submission within 15 minutes will not induce any penalty on your grades. But 00:16 am-1:00 am: Reduced by 10%; 1:01 am-2:00 am: Reduced by 20%; 2:01 am-3:00 am: Reduced by 30% and so on. (e.g. Li Hua submit a perfect attemp of hw1 on 2:10 am. He will get (100+10 (bonus))*0.7=77 points for his hw1.
Here is the format guide. The project structure is illustrated as below. You can also use tree command to check if your structure is fine. Structure mismatch would cause grade deduction.
├── report.pdf
└── source
│ ├── Makefile
│ ├── myfork.c
│ └──
├── program1
│ ├── abort.c
│ ├── alarm.c
│ ├── bus.c
│ ├── floating.c
│ ├── hangup.c
│ ├── illegal_instr.c
│ ├── interrupt.c
│ ├── kill.c
│ ├── Makefile
│ ├── normal.c
│ ├── pipe.c
│ ├── program1.c
│ ├── quit.c
│ ├── segment_fault.c
│ ├── stop.c
│ ├── terminate.c
│ └── trap.c
└── program2
├── Makefile
├── program2.c
└── test.c
4 directories,
Please compress all files in the file structure root folder into a single zip file and name it using your student id as the code showing below and above, for example,
Assignment_1_121010001.zip. The report should be submitted in the format of pdf, together with your source code. Format mismatch would cause grade deduction. Here is the sample step for compress your code.
zip -q -r Assignment_1_121010001.zip
Assignment_1_121010001
Task 1 (30 points)
In this task, you should write a program ( program1.c ) that implement the functions below: In user mode, fork a child process to execute the test program. (10 points)
When child process finish execution, the parent process will receive the SIGCHLD signal by wait() function. (5 points)
There are 15 test programs provided. 1 is for normal termination, and the rest are exception cases. Please use these test programs as your executing programs.
The termination information of child process should be print out. If normal termination, print normal termination and exit status. If not, print out how did the child process terminates and what signal was raised in child process. (15 points)
The main flow chart for Task 1 is:
Code Help, Add WeChat: cstutorcs
Demo outputs:
Demo output for normal termination:
Demo output for signaled abort:
Demo output for stopped:
./program1
Process start to fork
I’m the Parent Process, my pid = 4903
I’m the Child Process, my pid = 4904
Child process start to execute test program:
————CHILD PROCESS START————
This is the normal program
————CHILD PROCESS END————
Parent process receives SIGCHLD signal
Normal termination with EXIT STATUS = 0
./program1
Process start to fork
I’m the Parent Process, my pid = 4908
I’m the Child Process, my pid = 4909
Child process start to execute test program:
————CHILD PROCESS START————
This is the SIGABRT program
Parent process receives SIGCHLD signal
child process get SIGABRT signal
./program1
Process start to fork
I’m the Parent Process, my pid = 4931
I’m the Child Process, my pid = 4932
Child process start to execute test program:
————CHILD PROCESS START————
This is the SIGSTOP program
Parent process receives SIGCHLD signal
child process get SIGSTOP signal
Code Help
Task 2 (60 points)
In this task, a template (“program2.c”) is provided. Within the template, please implement the functions below:
When program2.ko being initialized, create a kernel thread and run my_fork function. (10 points)
Within my_fork, fork a process to execute the test program. (10 points)
The parent process will wait until child process terminates. (10 points)
Print out the process id for both parent and child process. (5 points)
Within this test program, it will raise signal. The signal could be caught and related message should be printed out in kernel log. (10 points)
Follow the hints below to implement your function. If the function is non-static, you should firstly export this symbol so that it could be used in your own kernel module. After that, you should compile the kernel source code and install it. (Kernel compile: 15 points)
Use “_do_fork” to fork a new process. (/kernel/fork.c)
Use “do_execve” to execute the test program. (/fs/exec.c)
Use “getname” to get filename. (/fs/namei.c)
Use “do_wait” to wait for child process’ termination status. (/kernel/exit.c)
The main flow chart for Task 2 is:
Demo output:
[ 3769.385776] [program2] : module_init
[ 3769.385777] [program2] : module_init create kthread start
[ 3769.385777] [program2] : module_init kthread start
[ 3769.389787] [program2] : The child process has pid = 2914
[ 3769.389793] [program2] : This is the parent process, pid = 2912
[ 3769.391602] [program2] : child process
[ 3769.391604] [program2] : get SIGTERM signal
[ 3769.391605] [program2] : child process terminated
[ 3769.391605] [program2] : The return signal is 15
[ 3773.346070] [program2] : module_exit./my
Note: the variable path in my_exec() in program2.c should be /tmp/test before submitting your homework, otherwise your grade would be influenced seriously
Bonus Task (10 pionts)
There is a linux command, called , which could print out the process tree of linux, as below:
❯ pstree systemd─┬─NetworkManager───2*[{NetworkManager}]
├─abrt-watch-log
├─auditd───{auditd}
├─blackbox_export─┬─run_blackbox_ex───tee
│ └─75*[{blackbox_export}]
In this task, we need to create a file to implement this function and the file name is pstree.c . There are many options of pstree . You can use man pstree to discover it. Before implementing this program, I suggest that use this command by yourself to see how it works.
The grading criteria:
The program can output a process tree as above. (5 points)
You will receive one point for each option implemented. So if you want to get 10 points in
bonus, you need to implement another 5 options of pstree . You cannot call the pstree command directly in your program.
Hints: This reference(https://en.wikipedia.org/wiki/Procfs) might help you to finish the bonus task.
Report (10 points)
Write a report for your assignment, which should include main information as below:
Your name and student id.
How did you design your program? (4 points)
How to set up your development environment, including how to compile kernel? (2 points)
Screenshot of your program output.(2 points) What did you learn from the tasks? (2 points)
Please note that the report will only be graded if you total score for Task 1 and Task 2 exceeds 54 points.
Grading rules
Here is a sample grading scheme. Differ from the points specified above, this is the general guide when TA’s grading.
Completion Marks
Bonus 10 points
Report 10 points
Completed with good quality 80 ~ 90
Completed accurately 80 +
Fully Submitted (compile successfully) 60 +
Partial submitted 0 ~ 60
No submission 0
References
https://www.gnu.org/software/libc/manual/html_node/Process-Identification.html https://elixir.bootlin.com/linux/v5.10/source (This one can help you to search symbols in the
https://seisman.github.io/how-to-write-makefile/ (Chinese) https://makefiletutorial.com/
Programming Help, Add QQ: 749389476