COMP9024: Assignment
Simple Graph structure-based Search Engine
[The specification may change. A notice on the class web page will be posted after each revision, so please check class notice board frequently.]
Change log:
No entry as yet!
Objectives
to implement a simple search engine based on the well known PageRank algorithm (simplified). to give you further practice with C and advanced data structures (Graph and BST ADTs)
Late Penalty
30 marks towards total course marks. Part-A (10 marks), Part-B (10 marks), Part-C (10 marks). 10am Monday 03 Feb 2020.
10% marks per day off the ceiling.
Last day to submit this assignment is 10am Wednesday 05 Feb 2020, of course with late penalty.
Read instructions in the “Submission” section below.
In this assignment, your task is to implement a simple search engine using the well known algorithm PageRank, simplified for this assignment, of course!. You should start by reading the wikipedia entries on the topic. Later I will also discuss these topics in the lecture.
PageRank (read up to the section “Damping factor”)
The main focus of this assignment is to build a graph structure, calculate PageRanks and rank pages based one these values. You don’t need to spend time crawling, collecting and parsing weblinks for this assignment. You will be provided with a collection of “web pages” with the required information for this assignment in a easy to use format. For example, each page has two sections,
Section-1 contains urls representing outgoing links. Urls are separated by one or more blanks, across multiple lines.
Section-2 contains selected words extracted from the url. Words are separated by one or more spaces, spread across multiple lines.
Hint: You can assume that maximum length of a line would be 1000 characters. You need to use a dynamic data structure(s) to handle words in a file and across files, no need to know max words beforehand.
Example file url31.txt #start Section-1
url2 url34 url1 url26
url52 url21
url74 url6 url82
#end Section-1
#start Section-2
Mars has long been the subject of human interest. Early telescopic observations
www.cse.unsw.edu.au/~cs9024/20T0/assn/Assignment.html 1/5
Code Help
COMP9024 20T0 – Assignment
revealed color changes on the surface that were attributed to seasonal vegetation
and apparent linear features were ascribed to intelligent design.
#end Section-2
Your tasks in summary:
Calculate PageRanks: You need to create a graph structure that represents a hyperlink structure of given collection of “web pages” and for each page (node in your graph) calculate PageRank value and other graph properties.
Inverted Index: You need to create “inverted index” that provides a list of pages for every word in a given collection of pages.
Search Engine: Your search engine will use the given inverted index to find pages where query term(s) appear and rank these pages using their PageRank values (see below for more details)
How to get started Hints and Sample files
Hints on “How to Implement Assignment”, will be discussed in the lecture.
Sample files for How to Get Started (ass2-getting-started.zip), will be discussed in the lecture. Sample1.zip
Additional files
You can submit additional supporting files, *.c and *.h, for this assignment. For example, you may implement your graph adt in files graph.c and graph.h and submit these two files along with other required files as mentioned below.
Part-A: Calculate PageRanks
You need to write a program in the file pagerank.c that reads data from a given collection of pages in the file collection.txt and builds a graph structure using Adjacency Matrix or List Representation. Using the algorithm described below, calculate PageRank for every url in the file collection.txt. In this file, urls are separated by one or more spaces or/and new line character. Add suffix .txt to a url to obtain file name of the corresponding “web page”. For example, file url24.txt contains the required information for url24.
Example file collection.txt
url25 url31 url2
url102 url78
url32 url98 url33
Simplified PageRank Algorithm (for this assignment)
PageRank(d, diffPR, maxIterations)
Read “web pages” from the collection in file “collection.txt”
and build a graph structure using Adjacency List Representation
N = number of urls in the collection For each url pi in the collection
iteration = 0;
diff = diffPR; // to enter the following loop
While (iteration < maxIteration AND diff >= diffPR)
iteration++;
www.cse.unsw.edu.au/~cs9024/20T0/assn/Assignment.html 2/5
Code Help, Add WeChat: cstutorcs
COMP9024 20T0 – Assignment
is a set containing links(urls) pointing to pi
(ignore self-loops and parallel edges)
is out degree of
corresponds to value of “iteration”
Your program in pagerank.c will take three arguments (d – damping factor, diffPR – difference in PageRank sum, maxIterations – maximum iterations) and using the algorithm described in this section, calculate PageRank for every url.
For example,
% pagerank 0.85 0.00001 1000
Your program should output a list of urls in descending order of PageRank values (use format string “%.7f”) to a file named pagerankList.txt. The list should also include out degrees (number of out going links) for each url, along with its PageRank value. The values in the list should be comma separated. For example, pagerankList.txt may contain the following:
Example file pagerankList.txt
url31, 3, 0.2623546
url21, 1, 0.1843112
url34, 6, 0.1576851
url22, 4, 0.1520093
url32, 6, 0.0925755
url23, 4, 0.0776758
url11, 3, 0.0733884
Sample Files for Part-A
You can download the following three sample files with expected pagerankList.txt files.
Use format string “%.7f” to output pagerank values. Please note that your pagerank values might be slightly different to that provided in these samples. This might be due to the way you carry out calculations. However, make sure that your pagerank values match to say first 6 decimal points to the expected values. For example, say an expected value is 0.1843112, your value could be 0.184311x where x could be any digit.
All the sample files were generated using the following command:
% pagerank 0.85 0.00001 1000
www.cse.unsw.edu.au/~cs9024/20T0/assn/Assignment.html 3/5
Programming Help
COMP9024 20T0 – Assignment
Part-B: Inverted Index
You need to write a program in the file named inverted.c that reads data from a given collection of pages in collection.txt and generates an “inverted index” that provides a sorted list (set) of urls for every word in a given collection of pages. Before inserting words in your index, you need to “normalise” words by,
removing leading and trailing spaces, converting all characters to lowercase,
remove the following punctuation marks, if they appear at the end of a word: ‘.’ (dot), ‘,’ (comma), ‘;’ (semicolon), ? (question mark)
In each sorted list (set), duplicate urls are not allowed. Your program should output this “inverted index” to a file named invertedIndex.txt. One line per word, words should be alphabetically ordered, using ascending order. Each list of urls (for a single word) should be alphabetically ordered, using ascending order.
Example file invertedIndex.txt
design url2 url25 url31 url61
mars url101 url25 url31
vegetation url31 url61
Note: for this part, in your output file, on each line, a word and urls must be separated by one (or more) spaces. The testing program will ignore additional spaces.
Part-C: Search Engine
Write a simple search engine in file searchPagerank.c that given search terms (words) as commandline arguments, finds pages with one or more search terms and outputs (to stdout) top 30 pages in descending order of number of search terms found and then within each group, descending order of PageRank. If number of matches are less than 30, output all of them.
Your program must use data available in two files invertedIndex.txt and pagerankList.txt, and must derive result from them. We will test this program independently to your solutions for “A” and “B”.
Note: For this part,
each line in “invertedIndex.txt” contains – a word and the corresponding urls separated by one (or more) spaces. Your program for Part-C needs to be able to handle such an input. Please see the sample program provided “exTkns.c” .
each line in “pagerankList.txt” contains – url, out-degree and pagerank. To simplify your task, you can assume that they are separated by “, ” – that is a comma and one space.
% searchPagerank mars design
Submission
Additional files: You can submit additional supporting files, *.c and *.h, for this assignment. IMPORTANT: Make sure that your additional files (*.c) DO NOT have “main” function.
www.cse.unsw.edu.au/~cs9024/20T0/assn/Assignment.html 4/5
COMP9024 20T0 – Assignment
For example, you may implement your graph adt in files graph.c and graph.h and submit these two files along with other required files as mentioned below. However, make sure that these files do not have “main” function.
I explain below how we will test your submission, hopefully this will answer all of your questions. You need to submit the following files, along with your supporting files (*.c and *.h):
pagerank.c inverted.c searchPagerank.c
Now say we want to mark your pagerank.c program. The auto marking program will take all your supporting files (other *.h and *.c) files, along with pagerank.c and execute the following command to generate executable file say called pagerank. Note that the other two files from the above list (inverted.c and searchPagerank.c) will be removed from the dir:
% gcc -Wall -lm -std=c11 *.c -o pagerank
So we will not use your Makefile (if any). The above command will generate object files from your supporting files and the file to be tested (say pagerank.c), links these object files and generates executable file, say pagerank in the above example. Again, please make sure that you DO NOT have main function in your supporting files (other *.c files you submit).
We will use similar approach to generate other two executables (for inverted.c and searchPagerank.c). How to Submit
Later, instructions on how to submit will be available here.
Plagiarism
You are allowed to use code from the course material (for example, available as part of the labs, lectures and tutorials). If you use code from the course material, please clearly acknowledge it by including a comment(s) in your file. If you have questions about the assignment, ask your tutor.
Your program must be entirely your own work. Plagiarism detection software compares all submissions pairwise (including submissions for similar projects in previous years, if applicable) and serious penalties will be applied, particularly in the case of repeat offences.
Do not copy from others; do not allow anyone to see your code, not even after the deadline
Please refer to the on-line sources to help you understand what plagiarism is and how it is dealt with at UNSW:
Plagiarism and Academic Integrity UNSW Plagiarism Procedure
Before submitting any work you should read and understand the sub section named Plagiarism in the course outline. We regard unacknowledged copying of material, in whole or part, as an extremely serious offence. For further information, see the course outline.
www.cse.unsw.edu.au/~cs9024/20T0/assn/Assignment.html